Bridgeport Milling Machine Mill Miller Power Feed Rotating Rotating Vise

This is a Bridgeport Milling Machine 1 HP, Step Pulley Speed Control, Power Feed Table, 6" Rotating Vise, Table Covers... Tested and runs perfectly.

• Serial # J-102979
• Uniclosed Motor:
• 50/60 Hz
• 206/220/440 Volts
• 3.9/3.5/2.0/1.75 Amps
• 1 Hp
• 1500/1800 RPM
• Serial Number 103034

Bridgeport 9" x 42" 1HP Milling Machine Package

• Bridgeport Milling Machine with Accessory Package as Shown:
• Single Point Lubrication
• Chrome Ways
• Step Pulley Speed Control
• DRO
• Vise
• 42" Table

SPECIFICATIONS

• Range:
• Table Travel (X-Axis) 30 in. (914 mm)
• Saddle Travel (Y-Axis) 12 in. (305 mm)
• Quill Travel 5 in. (127 mm)
• Knee Travel (Z-Axis)* 16 in. (406 mm)
• Ram Travel 12 in. (305 mm)
• Throat Distance (min.) 6.75 in. (171 mm)
• Throat Distance (max.) 18.75 in. (476 mm)
• Table to Spindle Nose Gage Line:
• - (min.) 2.5 in. (64 mm)
• - (max.) 18.25 in. (463 mm)
• Table:
• Overall Size 492 x 9 in. (1245 x 299 mm)
• Working Surface 42 x 9 in. (1245 x 229 mm)
• T-slots Centers 3 @ 2.5 in. (64 mm)
• T-slot Size 0.625 in. (16 mm)
• Height above Floor (max.) 47.25 in. (1200 mm)
• Weight of Workpiece (max.) TBD
• Spindle (2J Head):
• AC Power Rating:
• - (continuous) 1 hp (1.2 kW)
• Spindle Taper R-8
• Tooling R-8 Collets
• Speed Range:
• High (infinitely variable) 660 – 2720 rpm
• Low 80 – 325 rpm
• Power Quill Feed 0.0015 in./rev (0.038 mm)
• Manual Adjust:
• - 0.003 in./rev (0.076 mm)
• - 0.006 in./rev (0.152 mm)
• Drilling Capacity:
• Power Quill Feed 3/4 in. (19 mm)
• Milling Capacity (mild steel) 3/4 in. (19 mm)
• Boring Range (mild steel) 6 in. dia. (152 mm)
• Spindle Diameter 1.875 in. (48 mm)
• Quill Diameter 3.375 in. (86 mm)
• Positioning:
• Auto (X, Y) 100 ipm (2540 mm/min)
• Manual (X, Y) 100 ipm (2540 mm/min)
• Feedrate Range (X, Y) 0.1 – 35 ipm (2 – 889 mm/min)
• Minimum Increment 0.0001 in. (0.003 mm)
• Space and Weight:
• Floor Area:
• - 8.3 x 5.3 ft. (2.53 x 1.62 m)
• - 8.3 x 7.8 ft. (2.53 x 2.4 m)**
• Height 7.04 ft. (2.15 m)
• Net Weight 1930 lb (875 kg)
• Shipping Weight 2075 lb (941 kg)

PTWS # LR-000000-07242022-GD-02

Picture# 06202022

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions you may have...

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines, and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.