VOBIS DMSO Solution Fractional Distillation System 25 kg/h Built in 2020 in Pristine Condition!

This is a VOBIS DMSO Solution Fractional Distillation System 25 kg/h Built in 2020

25 kg/h Fractional Distillation System

Process Description

-   The feed flow rate is 25 kg/h.

-   The DMSO purity should be at least 99.6 wt%

-   Feed is supplied to column as a saturated liquid.

Power Required: 8.5Kw / h, 460V, 60Hz three-phase

Cooling Water Requirements: cooling water piping to system...

a.           17 °C，1.5m3/h, 0.3Mpa

b.           28 °C，5 m3/h, 0.3Mpa

Estimated Space Required: 2.2 (7.2ft) x 2.4 (7.8ft) x 4.5 m (height no more than 15 ft) the actual equipment installation dimensions. Must be level.

Vobis 25Kg/h Fractional Distillation System Equipment List:

1 material feed pump 2 pcs Q=0.5 m3/h SS304

2 pre-heater 1 pcs 1.8 m2 SS304

3 dehydration column 1 set φ225×4250 SS304

4 dehydration column reboiler 1 pcs 3.6 m2 SS304

5 circle pump 2 pcs Q=3 m3/h SS304

6 dehydration column condenser 1 group 10 m2 SS304

7 dehydration column reflux pump 2 pcs Q=1 m3/h SS304

8 waste discharge pump 2 pcs Q=0.5 m3/h SS304

9 rectification column feed pump 2 pcs Q=0.5 m3/h SS304

10 rectification column 1 pcs φ225×4250 SS304

11 rectification column reboiler 1 pcs 3.6 m2 SS304

12 circle pump 2 pcs Q=1 m3/h SS304

13 rectification column condenser 1 group 3.6 m2 SS304

14 dehydration column reflux pump 2 pcs Q=1 m3/h SS304

15 DMSO cooler 1 pcs 1.5 m2 SS304

16 DMSO pump 2 pcs Q=0.5 m3/h SS304

17 semi product reflux pump 2 pcs Q=0.5 m3/h H=40m SS304

18 vacuum pump 2 pcs 1.5X-30 SS304

19 piping, valves 1 set SS304

20 Siemens PLC control system 1 set assembly

21 equipment frame 1 set Q235

22 Insulation system 1 set assembly

PTWS -LCCA-00004-081324-A

Picture# 081324

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions please call Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.