Micro Edge Retro System 5x10 Plasma Cutting Machine with Power Max 1650 G3 Series Fast Steel Cutting

This is a Micro Edge Retro System 5x10 Plasma Cutting Machine with Power Max 1650 G3 Series in good condition.

• Model: Powermax 1650 G3 Series

5’ X 10’ CNC Plasma Cutting System with Hypertherm Micro Edge CNC Controller, Hypertherm Powermax 1650 Plasma Power Source and Dry Downdraft Cutting Table

GENERAL SPECIFICATIONS

• Maximum Cutting Width: 5'
• Maximum Cutting Length: 10'
• Plasma Type: Hypertherm Powermax 1650
• Table Type: Dry Downdraft

Hypertherm Powermax 1650 Plasma Cutter

Top Features

• Cutting Range: 1 1/4" – 1 1/2"
• For Cutting 1 1/4" Recommended, at Speeds > 19 IPM
• For Cutting 1 1/2" Maximum, at Speeds of 10 IPM
• Capacity for Severance 1 3/4" at low speed

Uncompromised power and performance, the Powermax 1650 plasma cutting system delivers superior cut capabilities on metals up to 1-1/2" (38 mm). Auto-voltage™ circuit provides automatic adjustment to any input voltage 220v, 3-phase

Hand Torch Cut Capacity

Recommended:

Up to 1-1/4" (32 mm) at cutting speeds of 19" (483 mm) per minute

Maximum:

Up to 1-1/2" (38 mm) at cutting speeds of 11" (279 mm) per minute

Severance:

Up to 1-3/4" (44 mm) at slow speed

Machine Torch Cut Capacity

Recommended:

Up to 1/2" (12 mm)

Maximum:

Up to 3/4" (19 mm)

(Cutting above requires an edge start)

NOTE: There will be a rigging /loading cost... please inquire!

PTWS - 08252024-BPO-06

Picture# 8232024

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions please call Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Contact us for great rates on shipping...

We always get better rates...

Please email us for a rigging and shipping quote; just include the zip code when inquiring and if you have a loading dock or ground level with forklift. Thank you!

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

We also ship worldwide.

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.