Walter Helitronic Minipower 5-Axis CNC Tool Grinder with Walter HMC 500 Control

This is a Walter Helitronic Minipower 5-Axis CNC Tool Grinder with Walter HMC 500 Control.

Walter Helitronic Minipower 5-Axis CNC Tool Grinder with Walter HMC 500 Control

Equipped With: Walter HMC 500 WWM Control, Fire Suppression System, Coolant Tank & Pump, Machine Manual

Electrics: 460 Volt, 3-Phase

Manufacturer: Walter Model: Helitronic Minipower Year: 1999 Serial Number: 663006

Main Unit Approx Weight: 5750.00 lbs

Main Unit Dimensions (in inches): Length: 81.00" Width: 100.00" Height: 91.00"

Components:

Coolant Tank: Length: 68.00" Width: 88.00" Height: 54.00"

Specs-Control: Walter HMC 500 WWM

Axis Motions (X/Y/Z): 350/200/460mm (13.779/7.874/18.110")

C-Axis (Rotary Table) Swiveling Range & Speed: +/- 200 Degrees / 120-Degrees Per Second

A-Axis Length: 150mm (5.905")

A-Axis Rotation: Infinite

A-Axis Center Height (With/Without Work Table): 130/160mm (5.118/6.299")

Max Diameter of Workpiece: 100mm (3.937")

Max Length of Workpiece (Peripheral / Face Grinding): 300/190mm (11.811/7.480"

Linear / Radial Resolution: .0001mm / .0001 Degree

Grinding Spindle Diameter: 70mm (2.755")

Max Grinding Wheel Diameter: 150mm (5.905")

Grinding Wheel Speeds: 0-9,500 RPM

Workhead Spindle Taper: ISO 50

PTWS# LGD-00000-122624

Picture #122024

* All information deemed accurate but may vary from model to model.

Contact Larry for any questions please call Four Zero One - Nine Six Five - Five Five Five Seven

___________________________________________________

Equipment Financing Available, please contact us!

Fast Application, it’s all filled in for you...

Online leasing applications (get LOW monthly payments)

* Please Note: Not all machines may qualify for Leasing.

Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks.

SHIPPING: Local Pickup Only

Contact us at Four Zero One - Nine Six Five - Five Five Five Seven

CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer’s purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Insurance on shipment must be requested by email, there will be an additional charge for shipping insurance. Shipping destination must be available to receive the shipment… any costs incurred on delays due to the buyers’ destination being unable to receive the shipment and/or additional services required, will be the responsibility of the buyer. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. All used equipment is sold "as is".

INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.